G
e
t S
tart
e
d
Part
S Ch
e
C
k
li
S
t
3
2
PIPETMAN® M CONNECTED
|
QUICK GUIDE
PArTs ChECKlIsT
|
PIPETMAN® M CONNECTED
Parts Checklist
●
PIPETMAN® M Connected pipette
●
Power supply, 5V with AC adapter and
cable
●
Battery tags (qty 4)
●
Ejector tags (qty 4)
●
Tip ejector extension (P10M model only)
●
PIPETMAN® M Connected Quick Guide
●
safety bag
●
Certificate of Conformity with bar-code
sticker
●
lubricant (except for the P10M and
multichannel models)
Installation
NOTICE
Fully charge the pipette (for
approximately three hours)
before use.
Use only one of the approved charging
devices:
●
Power supply, included in box
●
stand adapter, for use with Gilson
CArrOUsEl™ stands, sold separately
(part number F807023)
●
POWEr CArrOUsEl™ charging
pipette stand, sold separately
(part number FB1001)
NOTE
the battery can take a few minutes
to wake up.
Other References
This Quick Guid
e
provides you with basic
information to get started with PIPETMAN M
Connected.
Make sure you have read PIPETMAN M
Connected User’s Guide, available at:
www.gilson.com/pipetmanmconnected
.
Visit
www.gilson.com
for additional
information.
Get Started
All menu options (refer to
Menu Options
on
page 10) for PIPETMAN® M Connected
can be reached with two buttons.
Push Button
Turn the push button left or right to set the
volume. Push to pipette.
Menu Button
Access pipette modes and adjust functions.
NOTE
after three minutes of inactivity,
the pipette display will turn off and
enter sleep mode. Press the push
button to reactivate the pipette.
the last setting and pipetting mode
will appear on the screen.
Menu
Button
Push
Button
Figure 1
Buttons on the PIPETMAN® M
Connected
