Gilson macroman, Руководство пользователя

Страница: 4 / 9

7 6
MACROMAN
TM
|
USER’S GUIDE INTRODUCTION
|
MACROMAN
TM
INTRO
D
U
C
TI
O
N
Component Description
COMPONENT MATERIAL / PROPERTIES
Housing UV-resistant resin
Nosepiece UV-resistant resin
Thumbwheel UV-resistant resin
Side stand UV-resistant resin
Pipette Adaptor Silicone
Filter
PTFE, standard or sterile, hydrophobic membrane filter,
0.22 µm or 0.45 µm
Wall mount and Desk Stand ABS (Acrylonitrile butadiene styrene)
Technical Information
Technical Data
Flow rate
<3 seconds with 0.45 µm filter for 25 mL
<6 seconds with 0.45 µm filter for 50 mL
Dimensions 3.81 x 14.98 x 14.98 cm (1.5”W x 5.9”D x 5.9”H)
Weight MACROMAN: 205g
Power supply
Input voltage: 100–240 VAC, 50/60 Hz, 0.3A
Output voltage: 5 VDC, 500 mA Center positive DC connector
Unit: Input voltage 5 VDC, 500 mA Center positive DC connector
Battery Lithium rechargeable battery 3.7 V/ 2800 mAh
Battery charging time ≈ 6 hours
Battery discharge time > 10 hours
Equipment Disposal
This equipment must not be disposed of with unsorted municipal
waste. Instead, it is your responsibility to correctly dispose of
your waste equipment by handing it over to an authorized facility
for separate collection and recycling (do not dispose the device in a fire;
do not modify the Lithium-Ion battery in any way; discharge the battery
before disposal; dispose of the MACROMAN and the battery separately in
accordance with the laws and regulations in your area governing disposal
of devices containing Lithium-Ion batteries). It is also your responsibility to
decontaminate the equipment in case of biological, chemical,
and/or radiological contamination so as to protect from health hazards the
persons involved in the disposal and recycling of equipment.
For more information about where you can drop off your waste equipment
for recycling, please contact your local dealer from whom you originally
purchased the product or your local council. By doing so, you will help
conserve natural resources and you will ensure that your waste equipment
is recycled in a manner that protects human health and the environment.
Thank you.
O
PE
R
A
TIO
N
WARNING
Ensure that you are using an original Gilson main power supply
(100–240 VAC, 50/60 Hz) — part number F107203.
The power supply must not to be used for any other electrical equipment
except MACROMAN.
Chapter 2
OPERATION
Operating Conditions
SPECIFICATION CONDITION
Operating temperature +10°C to +40°C
Relative humidity 10% to 90% (no condensation)
Power supply Fluctuations not to exceed 10%
Charging MACROMAN
1. Before using MACROMAN for the first time, insert
the proper adaptor attachment into the power
supply (Figure 3). Turn the plug clockwise to lock.
2. Release by pushing down the button and turn
counter-clockwise to release the plug.
3. Plug the power supply into a standard
electrical source.
4. Gently insert the power jack into the
power supply charging socket located in
the base of MACROMAN (Figure 4).
5. When MACROMAN is properly connected,
the battery icon will indicate the charging
status.
6. The battery display shows between 1 to
6 bars in sequence from empty to full.
Allow the battery to charge for more
than 6 hours before using MACROMAN
for the first time. Once MACROMAN is
completely charged, the battery icon
shows as full (solid bars). You can also
use MACROMAN during the charging
process.
Using excessive force may
damage MACROMAN.
The battery icon will flash when battery is at less than 10% charged.
The battery is charged at:
•
15% after 1 hour
•
30% after 2 hours
•
61% after 4 hours
•
100% after more than 6 hours
Figure 3
Insert the adaptor you need
into the power supply
Figure 4
Plugging the power supply into
MACROMAN
TM
MASTER
Figure 5
Battery icon