Gilras GRT-700, Руководство пользователя

Страница: 10 / 15

4) Assembly Process
1. First of all, open the box and read the instruction manual carefully, then
check the parts and tools.
2. Put the mainframe on a suitable place, adjust the 4 screws on the base
to make sure that the mainframe is stable.
Notice particularly: When assemble or move the instrument, don’t take
the operating board.
3. Install the chair
Take out the chair, unscrew the 4 screws on it, align the holes on the chair
and their corresponding holes on the chair connecting plate, then fix them
with the screws.
4. Install the upright post
Put the decorative ring around the upright post shaft, make the power
lines of the projector and lamp go through the holes on the chassis, then
put the upright post around the shaft, in this step, you should keep the
upright post vertical to the ground. Then open the back cover of the
chassis through loosing the screws on it, find the power lines of the
projector and lamp, connect them to the corresponding positions of the
circuit board, the last step is fix the upright post to the chassis through
tightening the screws.