GILMAN Gemini GMH2000, Руководство пользователя

Страница: 5 / 16

5
PREPARATION
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug into a grounded power outlet.
Press power switch button, and the indicator light on the control panel is on.
Only operate the heater in upright position with wheel brackets attached.
1. Start and select working mode
2. Setting the desired room temperature
Room temperature display after Power-on
Turn the heater on by pressing the ON/OFF button on the
right side plate of the main unit or pressing the Power button
on the supplied remote control. The display show“ ”,
which means it connect the power.
Unit runs alternatively between high power and low power.
Press the power button on the control panel or press the mode
button on the supplied remote control. (H-High power; L-Low
power)
Temperature display, indoor desire temperature selection.
Press the MODE button twice on the control panel or press
the TEMP button on the supplied remote control.
Set the desired room temperature.
Press + or – button on the control panel or remote control
to adjust the desired room temperature.
Press more the + or – button, set temperature indication
varies from 15ºC to 35ºC. Once you have chosen the desired
temperature, the heater will remain on until the room tem-
perature increases to the temperature on the digital display.
Note: it can not set the desired temperature lower than
room temperature.
After 10 second stopping operation, digit blinks and indicates
shifts from set temperature to room temperature.
Digit blinks and indicates shift from ambient temperature to
set the temperature.
PRESS ON
PRESS
OFF
H or L
+ or -
ºC