GILMAN gemini GCM135, Руководство пользователя, Страница: 10 / 30

TURN ON THE COFFEE MAKER
a. Make sure unit is plugged in.
b. Turn unit on by pressing the power On/Off button located on the side of the unit.
All the symbols will be blinking 3 times with a sound “bee” when the machine turned
on. The symbol will be blinking during heating and until the water reaches the perfect
temperature. Once all symbols become solid sate, the function is ready to use. If you
press the symbol which is blinking and not ready, it will sound “ bee bee bee” to tell
you it is not ready yet and won’t start the operation.
“SLEEP STATE” MODE
To save energy, the machine will auto-shut off to the “sleep state” mode after no
operation within 25 minutes, and all the symbols will turn off except “ ” (Self
clean function). To “wake up” the machine, press “ ” (Self clean function), and
all symbols will be on again with “bee” and go back to normal state. (after waking
up, it might be on warming up state which all the symbols are flashing or ready
state which all the symbols solid sate .)
SELECT THE FUNCTION
PREPARING ESPRESSO
a. Press “ ” (Single espresso) once to brew one single shot.
b. Press “ ” (Double espresso) once to brew a double shot.
c. Press and hold “ ” (Double espresso) for 3 seconds to customize the brewing
capacity to your flavour. When done, press it again to stop it. (If don't press it again,
it will make coffee in 250ml Max)
The unit will start brewing the espresso according to your selection. The unit will
turn off automatically and symbol will become solid indicating that the cycle has
been completed. Your delicious espresso is ready to serve.
Please follow the table of “SELECT THE RIGHT CUP” to chose the cups with
suitable capacity to avoid overflow.
Note:
To brew less coffee than the preset serving, press the same symbol again to
stop the brewing process when the desired amount of coffee is reached.
PREPARING CAPPUCCINO
Prior to preparing your Cappuccino, adjust the quantity of frothed milk according to
your preference by shifting the Froth Control Knob on the mill tank. Swing it to the
right for more froth and to the left for less froth.
Note
：
The foam intensity can be adjusted during the brewing process
10