GILMAN Gemini GAP12, Руководство пользователя

Страница: 5 / 18

5
How to use the product:
1.Turn on the product : after connecting to the power supply,
press the "on / off /wind speed key” on the control panel to
start operation, and the machine runs in "Low wind speed
mode" by default and its indicator light on.
2.Select the wind speed : Follow to Step 1 to turn on the product, press the”on/off / wind
speed” key again to switch to``high-wind speed mode operation. If you continue to
press the``on/off /wind speed” key again , the product will turn it off and its indicator
goes off.
3.Filter replacement reminder signal: machine runs 1500 hours
in total, the "on / off/ wind speed " key indicator will keep
flicker as alarm signal ( Di Di sound will keep ringing ),
prompting users to replace the filter. After replacing the filter,
press and hold the "on / off / wind speed" key for 5 seconds
to reset, and the machine enters recounting cycle of the new
filter replacement timing cycle.
How to Use Plant stand :
First, align the four base edges of the plant stand are inserted into the top anti-slip slots of
the machine, and must be placed on a smooth and dry horizontal and not inclined
surface .
A. Aquatic small fish: First put the plant stand firmly at the top of anti-slip slots of the
machine, add the fresh water not more than 250 ml
（
not more than 3/5 portion ratio
of the inner stand
）
, excessive loading may lead to water overflow into the machine
and cause the machine not working. and slowly put the small fish into the plant stand.
B. When used it for a cultivation plant , if you use soil, only fill up the soil not more
Anti-slip slot