STEP 3 - FOLLOW YOUR
PERSONALISED LIVE PRESSURE
FEEDBACK WHENEVER YOU
SHAVE
•
Before each shave, remove your razor from the base station and
hold the handle so that the pressure indicator light turns light
green to indicate that the handle is on and activated.
•
As you shave the pressure indicator light will show
bright
green
if you are shaving in the optimal pressure range or
red
if your
pressure is too high
•
Once you have completed your shave, return your razor to the
base station. The base status indicator light will turn
blue
to
indicate that the base is communicating with the handle.
STEP 4 - DOCK & CHARGE YOUR
RAZOR IN BETWEEN SHAVES
•
For the system to keep working effectively, please dock your
razor for it to charge and to keep both its software & your person
profile fully up to date.
CLEANING
The handle is waterproof, so you can rinse the handle and the
shaving system under warm running water until all residue has been
removed. You may use liquid soap without abrasive substances.
Rinse off all foam.
The appliance must not be cleaned in a dishwasher.
TROUBLESHOOTING
BASE
If you are having technical issues with your base, such as no
blue
light to indicate communication between handle and base, please
try the following:
•
Make sure your base is in a location believed to have good 3G
data signal.
•
Unplug and restart your base without the handle docked.
•
Dock the handle to the base once the base status light has
turned
green
.
•
Dock the razor to the base, making sure that the razor status
light starts to flash
green
indicating that it is connected and
charging.
•
If there is no green light on the handle, try applying pressure to
press the handle and base together.
