All specifications are subject to change without notice.
Copyright ©2017 Wilson & Gilkes. All rights reserved.
2. WARNINGS & SAFETY INSTRUCTIONS
Failure to read, understand and follow all instructions can result in serious personal injury, damage to
equipment or voiding warranty. It is the installer’s responsibility to make sure all components are properly
installed using the instructions provided.
3
WARNING!
!
● Installation & assembly work must be carried out by properly licenced technicians or qualified trades people.
● Incorrect installation can cause the
8IMFP7-WM
unit to fall and cause injury. This company assumes no responsibility for injuries or damages that may
occur due to improper installation and handling.
● The unit is designed for use with specific products and weight. Exceeding maximum weight capacity to the moving frame may damage product and equipment
and could lead to serious personal injury.
● Adhering to proper installation instructions is critical in ensuring all components function properly. A small difference in installation can lead to a severely skewed
and distorted projection image. In order to obtain a square image without the use of digital adjustment of the projector, follow the step by step instructions as
shown.
● Installation will require the lifting of heavy components. A minimum of two people are required.
● Fully tighten all mounting screws as specified in the installation instructions. However, attachment points can be damaged if a power drill is used to tighten
screws. Screws should be turned by hand first before tightening with a hex key. Do not over tighten screws. Check fasteners regularly to avoid parts becoming
loose.
● Do not allow children to climb onto the frame
● Make sure cables are not caught between moving parts to ensure cables will not be damaged. Cable tie all loose cables to avoid damage.
● When the
8IMFP7-WM
is not in use, switch off the power source.
● Make sure the fully raised height of the
8IMFP7-WM
does not exceed the height of the building/room the
8IMFP7-WM
will be used in.
