The monitor screen turns off when the camera is no transmi ng.
When the camera detects the sound is louder than the set sensi vity level, it will
start transmi ng the signal to the monitor again.
To change the ECO level, please follow the next instruc ons:
1. Press the Menu/OK/Up key (=
OK
) for the menu.
2. Press the Vol-/Le key or Vol+Right key un l the ECO icon is highlighted,
then press Menu/OK/Up key (=
OK
) to enter into ECO mode.
3. Press the Vol-/Le key or Vol+Right key to select desired level.
4. Press the Menu/OK/Up key (=
OK
) to confirm.
3.2 ALERT VOLUME SETTING
Enter to adjust the alarm sound level.
To keep quiet, you can choose mute mode.
3.3 LULLABY SETTING
You can soothe the baby to sleep by playing a gentle lullaby from the baby unit.
1. Press the Menu/OK/Up key (=
OK
) for the menu.
2. Press the Vol-/Le key or Vol+Right key un l the lullaby icon is
highlighted, then press Menu/OK/Up key (=
OK
) to enter into Lullaby mode.
3. Press the Vol-/Le key or Vol+Right key to select desired level.
4. Press the Menu/OK/Up key (=
OK
) to confirm.
3.4 PAIRING THE CAMERA AND MONITOR
1. Press the Menu/OK/Up key (=
OK
) for the menu.
2. Press the Vol-/Le key or Vol+Right key un l the camera icon is
highlighted, then press Menu/OK/Up key (=
OK
) to enter into pair mode.
3. Press the Vol-/Le key or Vol+Right key to select desired level.
4. Press the Menu/OK/Up key (=
OK
) to start the pairing.
5. While the LED is flashing, press the PAIR bu on on the back of the camera.
6. Once paired, the screen will display the image from the camera.
7. Repeat the above steps in case of failed opera on.
5
