Gilis Bebe Stars Belize, Руководство пользователя

Страница: 25 / 44

VI. USE OF BRAKE
The buggy is equipped with a foot parking brake. Press the brake with your
foot (FIG. 12.1). The brake is ac vated a er you hear the sound of the lock.
The brake is unlocked a er moving the brake lock up (FIG. 12.2).
VII. ASSEMBLY/DISASSEMBLY
VII.I SEAT
When installing the seat on the buggy frame, s ck the seat connector (A) in
to the frame slot (B) (one on each side of the buggy) un l you hear a click
(FIG. 13.1). The seat may be mounted forward or rearward (FIG. 13.2). When
removing the seat, press the lever for releasing the seat from the frame on
the both sides (FIG. 14.1) and pull it up (FIG. 14.2). Leg cover should be
mounted using the press studs on the outside of the canopy hinges.
NOTE! Do not fold the buggy frame when the bassinet or the seat in its rear
posi on is installed on it.
VII.II CANOPY
NOTE! INSTALL THE CANOPY BEFORE USING THE BUGGY
Place the canopy in the guide in the buggy frame and make sure it is properly
installed (FIG. 15.1). When removing the canopy, press the bu on on either
side of the seat and remove the canopy (FIG. 15.2). When installing and
removing the canopy remember about Velcro fasteners on the sides and the
zip on the back of the backrest.
VII.III SAFETY BAR
When installing the safety bar, insert it in the appropriate guides in the seat
frame un l it clicks (FIG.16.1). To remove the part, press the bar release
bu ons on either side of the guide and remove the safety bar (FIG. 16.2).
VIII. SAFETY BELTS
Press the bu on to open the clasp (FIG. 17.1). To secure the child, connect
the latches of the hip and shoulder straps and then insert them into the
middle clasp (FIG. 17.2) un l it engages.
23