Remove the heat sensitive roll paper cover.
Cut the end of the heat sensitive paper a
shown below.
3. I n s t a l l i n g t h e
Thermal Paper (See
fig. 14)
a .
i d e b a c k a n d r e m o v e
t h e T h e r m a l P a p e r C o v e r
( 3 ) f r o m t h e p r i n t e r
s e c t i o n . ( s e e F i g . 1 4 )
b . U s e t h e s p e c i a l
h e a t s e n s i t i v e r o l l p a p e r
( A - 4 0 0 6 8 1 ) .
c. Cut the end of the
p a p e r i n a h a l f c i r c l e o r
t r i a n g u l a r s h a p e .
d . W h i l e i n s e r t i n g t h e e n d
o f t h e p a p e r , p r e s s t h e
P a p e r F e e d S w i t c h ( 5 )
u n t i l t h e p a p e r i s f e d
o u t .
R e p l a c e p r o t e c t i v e
p a p e r c o v e r . ( s e e F i g . 1 5 )
F i g u r e 1 4
While inserting the end of the
sensitive
roll paper in the direction of the arrow, press
and hold the paper feed switch until the paper
is fed out. Since the outside of the heat
tive roll paper is coated with a heat sensitive
careful attention to the front and
back of the paper.
F i g u r e 1 5
