Gilera Runner PureJet 50, Руководство пользователя

Страница: 41 / 60

03_28
Periods of inactivity (03_28)
Prepare the vheicle as follows:
1) Clean the vehicle.
2) With the engine stopped and the piston at the bottom of its stroke , remove the
spark plug and pour about 1÷2 cc. engine oil into the cylinder. Then turn the engine
over a few times using the kick-starter and refit the spark plug.then,start the starter
motor 3÷4 times for 2-3 seconds .
3) Drain the fuel tank and coat unpainted metal parts with protective grease;position
the vehicle so that the tires ar not resting on the ground by placing wood blocks under
it.
4) For the battery , follow the procedure described on the section «Battery».
Recommended products
eni i-Ride PG 2t
Synthetic based lubricant for low smoke 2-stroke engines and additives.
API TC - JASO FC - ISO-L-EGD
Cleaning the vehicle
Use a low pressure jet of water to soften the caked dirt and mud deposited on the
painted surfaces. Once softened, sponge off mud and dirt using a car body sponge
soaked in a car body shampoo and water solution (2-4% of car shampoo in water).
Then rinse with abundant water, and dry with a shammy cloth. For the engine exterior,
use petrol, a brush and clean cloths. Petrol can damage paintwork. Remember that
any polishing with silicone wax must always be preceded by washing.
41
3 Maintenance