Gilera Runner 125VX, Руководство пользователя

Страница: 17 / 90

SHOULD THE VEHICLE CHANGE OWNERS, IT IS ABSOLUTELY NECESSARY
THAT THE NEW OWNER GET POSSESSION OF THE KEY WITH THE BROWN
GRIP (AS WELL AS ALL OTHER KEYS) AND THE «CODE CARD»
Programming the immobilizer system
In the following is described the procedure to follow to program the " PIAGGIO IM-
MOBILIZER " system and/or enter other keys in the memory.
Procedure start - brown key
Insert the brown key into the key switch (in the « OFF » position), turning it to the
« ON » position. After 1 - 3 seconds, turn the key to « OFF » again and pull it out.
Intermediate step - red key
After extracting the brown key, insert the red key within ten seconds and turn it im-
mediately to the «
ON » position. After 1-3 seconds, turn the key to " OFF " again and
pull it out. Repeating this procedure, respecting the indicated times, a maximum of
three red keys can be programmed.
Final step - brown key
After extracting the last red key, insert the brown key again and turn it to the « ON »
position (perform this within ten seconds of the extraction of the previous key). Leave
it in this position for 1 to 3 seconds and return it to the «
OFF » position.
Proper programming check
Insert the brown key, disabling the transponder (i.e., by tilting the key hood by 90°),
and turn the key to the «
ON » position. Perform the engine start-up operation. Ensure
that the engine does not start. Insert the red key and start up again. Check that engine
starts.
WARNING
IF THE ENGINE STARTS WITH THE BROWN KEY (AND WITH A DISABLED
TRANSPONDER) OR IF DURING THE PROGRAMMING A WRONG STEP HAS
17
1 Vehicle