Gilera Fuoco 500ie, Руководство пользователя

Страница: 72 / 96

2 . Be careful to rest the vehicle on its centre stand disabling the front suspension
locking system;
3. With engine off and piston at the bottom dead centre, remove the spark plug, add
1÷2 cc of oil through the opening (adding more oil may damage the engine). Operate
the starter button 1-2 times for roughly 1 second to turn the engine over slowly, then
insert the spark plug again;
4. Empty all fuel; spread antirust grease on the unpainted metal parts; keep the wheels
lifted above the ground by resting the chassis on two wooden wedges;
5 . For the battery, follow the procedures described in the «Battery» section.
Recommended products
AGIP CITY HI TEC 4T
Engine oil
SAE 5W-40, API SL, ACEA A3, JASO MA Synthetic oil
Cleaning the vehicle
In order to soften the dirt and mud deposited on the painted surfaces, use a low pres-
sure jet of water. Once softened, mud and dirt must be removed with a soft sponge
for bodywork soaked in lots of water and "shampoo" (2-4% of car shampoo in water).
Then rinse abundantly with water, and dry with a shammy cloth. For the outside of the
engine, use petroleum, a brush and clean cloths. Petroleum can damage paintwork.
Remember that any polishing with silicone wax must always be preceded by washing
CAUTION
DETERGENTS CAN POLLUTE WATER. THE VEHICLE MUST BE WASHED AT A
WASH STATION EQUIPPED WITH A SPECIAL WATER PURIFICATION SYSTEM.
72
3 Maintenance