Gilera DNA Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 68

Gilera DNA Скачать руководство пользователя страница 18

Checks

Before riding the vehicle, check:

1

. The fuel and oil tanks are full.

2

. The rear hub oil level.

3

. The tyres are inflated correctly.

4

. The headlight, taillight and turn signals are working properly.

5

. The front and rear brakes are in riding order.

6

. The fluid level in the brake pump reservoir.

7

. The coolant level in the expansion tank.

02_01

Refuelling (02_01, 02_02)

Refill the fuel tank «

A

» with unleaded petrol with 95 octane min. The low-fuel warning

light on the dashboard signals that the fuel level has reached the reserve quantity.
Top up the oil tank «

B

» with the recommended oil.

CAUTION

SHUT OFF THE ENGINE BEFORE REFUELLING WITH PETROL. PETROL IS
HIGHLY FLAMMABLE. DO NOT LET PETROL SPILL FROM THE TANK OR WHILE
REFUELLING

CAUTION

DO NOT BRING NAKED FLAMES OR CIGARETTES NEAR THE MOUTH OF THE
FUEL TANK: FIRE HAZARD. ALSO AVOID INHALING HARMFUL VAPOURS.

18

2 Use

«
...
16
17
18
19
20
...
»

Содержание DNA





































































Отзывы:

Нет отзывов