7
6.
Port 21 DMB- This port is used supplying power for CRIND loop #1
7.
Port 22 DMB- Not Used
8.
Port 23 DMB- Not Used
9.
Port 31 LON- Not Used
10.
Port 32 LON- Not Used
11.
Port 41 Ethernet- This port has an Ethernet cable connecting to it, which leads to
an external Ethernet port. That is used for downloading software to the CPB.
12.
Port 1/Service Port- This is a RS-232 connection that can also be used for
downloading software to the CPB. It can also be used for Servicing and
Diagnostics
13.
Power Supply Connector- 3-Pin connector from the Transformer connects here
14.
Keyboard- The CPB has a 5-key keyboard called a local service panel that is used
to access some programming if a laptop is not available. *
Does not access all
programming
15.
Display- The display is used in conjunction with the keyboard so programming
options can be seen
16.
Test Connector- This connector is not used
17.
BDM Connector- This connector is not used
18.
JTAG Interface- This connector is not used at this time
19.
& 20- Sockets for LON options (These are not used at this time)
The CPB is a microprocessor-based controller for use in the PAM 5000 forecourt
controller system. It is equipped with the following:
5 DSB ports
3 DMB ports
1 Ethernet interface
2 LON interfaces (add on options)
16MB Flash memory for application software
4MB SRAM for data memory
A keyboard consisting of 5 keys together with a 32-character LCD display makes it
possible to adjust and monitor several parameters without the need for connecting an
external PC.
A battery is used for data and real-time clock in case of a power failure.
Содержание PAM 5000
Страница 1: ...1 Gilbarco PAM 5000 Launch Package...