MDE-3584C • Snap-In Bezel Membrane Switch Installation Instructions • 08/99
Page 3
Installation
Read NFPA 30A and NFPA 70
Before servicing the equipment, read, understand and follow applicable information in the
following codes:
• The National Electric Code (NFPA 70)
• The Automotive and Marine Service Code (NFPA 30A)
• Any national, state and local codes that may apply
The failure to service the equipment in accordance with NFPA 30A and NFPA 70 may
adversely affect the safe use and operation of the system.
Before You Begin
Read and understand the following information before installing this kit.
1
Read all instructions before beginning.
2
Follow all of the following safety precautions.
• Barricade the work area.
• Do not allow vehicles or unauthorized people in work area.
• Do not smoke or have open flames in work area.
• Do not use power tools in work area.
3
Record all electronic and mechanical totals.
4
Turn off all power to unit, unit lights and STPs.
• Use system circuit breakers.
• Multiple disconnects may be required.
• Isolate each pump at distribution box.
5
Follow proper electrostatic discharge (ESD) procedures.
• Place yourself at a neutral, static-free potential. Touch a conductive metal surface.
• Use a wrist strap connected to a grounded metal frame or chassis.
