background image

MDE-5387D Hybrid Card Reader S (HCRS) Kit Installation Instructions · May 2020

Page 5

Important Safety Information

No Open Fire

 

Open flames from matches, lighters, welding torches, 

or other sources can ignite fuels and their vapors.

No Sparks - No Smoking

 

Sparks from starting vehicles, starting, or using power tools, 
burning cigarettes, cigars, or pipes can also ignite fuels and 
their vapors. Static electricity, including an electrostatic charge 
on your body, can cause a spark sufficient to ignite fuel vapors. 
Every time you get out of a vehicle, touch the metal of your 
vehicle, to discharge any electrostatic charge before you 
approach the dispenser island.

Working Alone

It is highly recommended that someone who is capable of 
rendering first aid be present during servicing. Familiarize 
yourself with Cardiopulmonary Resuscitation (CPR) methods, if 
you work with or around high voltages. This information is 
available from the American Red Cross. Always advise the 
station personnel about where you will be working, and caution 
them not to activate power while you are working on the 
equipment. Use the OSHA Lockout/Tagout procedures. If you 
are not familiar with this requirement, refer to this information in 
the service manual and OSHA documentation.

Working With Electricity Safely

Ensure that you use safe and established practices in working 
with electrical devices. Poorly wired devices may cause a fire, 
explosion, or electrical shock. Ensure that grounding 
connections are properly made. Take care that sealing devices 
and compounds are in place. Ensure that you do not pinch 
wires when replacing covers. Follow OSHA Lockout/Tagout 
requirements. Station employees and service contractors need 
to understand and comply with this program completely to 
ensure safety while the equipment is down.

Hazardous Materials

Some materials present inside electronic enclosures may 
present a health hazard if not handled correctly. Ensure that 
you clean hands after handling equipment. Do not place any 
equipment in the mouth. 

 

In an Emergency

Inform Emergency Personnel

Compile the following information and inform emergency 
personnel:

• Location of accident (for example, address, front/back of 

building, and so on)

• Nature of accident (for example, possible heart attack, run 

over by car, burns, and so on)

• Age of victim (for example, baby, teenager, middle-age, 

elderly)

• Whether or not victim has received first aid (for example, 

stopped bleeding by pressure, and so on)

• Whether or not a victim has vomited (for example, if 

swallowed or inhaled something, and so on)

 

IMPORTANT

: Oxygen may be needed at scene if gasoline has 

been ingested or inhaled. Seek medical advice immediately.

Lockout/Tagout

Lockout/Tagout covers servicing and maintenance of machines 
and equipment in which the unexpected energization or 

start-up of the machine(s) or equipment or release of stored 
energy could cause injury to employees or personnel. 

Lockout/Tagout applies to all mechanical, hydraulic, chemical, 
or other energy, but does not cover electrical hazards. 

Subpart S of 29 CFR Part 1910 - Electrical Hazards, 29 CFR 
Part 1910.333 contains specific Lockout/Tagout provision for 
electrical hazards.

The pump/dispenser contains a chemical known to the 
State of California to cause birth defects or other 
reproductive harm.

WARNING

!

The pump/dispenser contains a chemical known to the 
State of California to cause cancer.

WARNING

!

Gilbarco Veeder-Root encourages the recycling of 
our products. Some products contain electronics, 
batteries, or other materials that may require special 
management practices depending on your location. 
Please refer to your local, state, or country 
regulations for these requirements.

 

Gasoline/DEF ingested may cause 
unconsciousness and burns to internal organs. 
Do not induce vomiting. Keep airway open. 
Oxygen may be needed at scene. Seek medical 
advice immediately.

!

DEF generates ammonia gas at higher temperatures. 
When opening enclosed panels, allow the unit to air out to 
avoid breathing vapors. If respiratory difficulties develop, 
move victim away from source of exposure and into fresh 
air. If symptoms persist, seek medical attention.

WARNING

!

WARNING

Gasoline inhaled may cause unconsciousness 
and burns to lips, mouth, and lungs. Keep airway 
open. Seek medical advice immediately.

WARNING

!

Gasoline/DEF spilled in eyes may cause burns to 
eye tissue. Irrigate eyes with water for 
approximately 15 minutes. Seek medical advice 
immediately.

WARNING

!

Gasoline/DEF spilled on skin may cause burns.
Wash area thoroughly with clear water.
Seek medical advice immediately.

WARNING

!

DEF is mildly corrosive. Avoid contact with eyes, skin, and 
clothing. Ensure that eyewash stations and safety 
showers are close to the work location. Seek medical 
advice/recommended treatment if DEF spills into eyes.

WARNING

!

Содержание HCRS

























Отзывы: