Installing Mat Reader Assembly
Page 12
MDE-4017G Mat Reader Assembly Kit (C00016-XXX) Installation Manual · April 2017
8
Gently turn the mat reader to the face-up position (see
).
Figure 6: MR01003GXXX Mat Reader - Face Up
9
Connect the loose end of the work area cable to the POS system.
• For a Passport system, the mat reader connects to the P3 port on the Universal Serial Bus
(USB) converter using a Q13180-20B Gender Mender. For more information, refer to
MDE-4157 Passport Combined Cashier/Manager Workstation, MDE-4158 Passport
Cashier Workstation, and MDE-4159 Passport Standalone Manager Workstation.
Connecting Wall-mount Power Supply (M01878B001)
To connect the wall-mount power supply provided with the kit as shown in
, proceed
as follows:
Figure 7: Wall-mount Power Supply
Wall-mounted
Transformer
Plugs into JDC1 Port
Plugs into AC Power Outlet
1
Plug the wall-mounted transformer into the AC power outlet.
Note: This AC power outlet must be on the same circuit as the POS system.
2
Connect the plug end of the power supply cable to the JDC1 port on the mat reader interface
box (see
).
