CPE Installation Note
2
DCP0000072(D)
Place the CPE on an even, flat surface.
Figure 1: Front View
Connect the two RF cables (from the LNB and ODU) to the RF-IN and RF-OUT connectors,
respectively, as shown in Figure 2, using a recommended torque of 13 lb*ft/in (1.5 N/m).
Figure 2: Rear View
Connecting AC adapter and power cords
1.
Use only the approved adapter supplied.
2.
Connect the adapter’s power plug to the CPE 24VDC port.
3.
Connect the main power cable from the adapter to the local AC power receptacle.
LAN Cable
Use only CAT-5 type cables to connect to the LAN port.
