Capricorn MEC Installation Note
3
DCP0000192(B)
Connecting RF Cables
Connect the two RF cables (from the LNB and ODU) to the RF-IN and RF-OUT connectors,
respectively, as shown below, using a recommended torque of 13 lb*ft/in (1.5 N/m).
Figure 2: Capricorn MEC CPE Cables
Connecting LAN Cable
Use only CAT-5 type cables (approved by Gilat) to connect to the LAN ports.
Use only the LAN LEDs indications to make sure that the LAN ports are operational.
Connecting Grounding Cable
Connect the grounding cable (GND) from the CPE to the approved site.
