Gilat Satellite Networks SkyEdge II, Руководство по установке

Страница: 19 / 34

SkyEdge II VSAT Installation and Monitoring
Result: A Save As dialog box opens.
4. Save the file to the desired location. It is recommended that the file be saved to
the Desktop.
A sample file is shown in Figure 15.
Figure 15: Setup file
C
AUTION
Do not attempt to edit the saved file. All modifications should be made
using the web page.
2.3.2 Uploading a File to a VSAT
To upload a file to a VSAT:
1. On the Setup from file page, click Browse (Figure 13).
2. Browse to the location of the file and click Load .
Result: The parameters are loaded to the VSAT.
2.3.3 Modifying VSAT Parameters
To modify the VSAT parameters that are different from the ones in the imported file,
go to Section
2.2.2 and start at step 3.
SE VSAT Install and Monitor
May, 2007
13
Proprietary and Confidential