Gilat Satellite Networks SkyEdge II, Руководство по установке

Страница: 9 / 34

SkyEdge II VSAT Installation and Monitoring
2. Configuring the VSAT
2.1 Data Required
Prior to configuring a VSAT verify that the following parameters have been supplied
by the hub operations staff using the spreadsheet supplied by Gilat. The parameters
are found in Table 1.
2.2 Configuring SkyEdge VSATs via SkyManage Web Page
N
OTE
Before starting the configuration process verify that all of the
configuration parameters required during the procedure are available.
2.2.1 Accessing the SkyManage Web Page
N
OTE
Microsoft
©
Internet Explorer (V 5.5 or higher) and Firefox (V 1.0 or higher)
web browsers are supported on PCs.
The SkyManage web page can be accessed in a number of different ways:
„
Via a PC using a cross LAN cable
„
Via a PC with a wireless link. A wireless adapter is inserted in the VSAT LAN
port.
„
Via a PDA (Palm type device) running Microsoft Mobile 2003 or Palm OS with
PalmOne Blazer (V4.0 or higher) web browser. Either a cross LAN cable or a
wireless connection can be used.
N
OTE
„
All of the captures in this section were taken using Microsoft Internet
Explorer. The screens viewed when using other web browsers may
be slightly different in appearance.
„
All of the captures were carried out on a VSAT that had not yet
downloaded its operational code.
„
Verify that the device being accessed has its IP address configured
on the same subnet as the built-in web page (192.168.1.1).
„
Verify that the use of a proxy has been disabled in the browser
application.
SE VSAT Install and Monitor
May, 2007
3
Proprietary and Confidential