Owner’s Manual
MODEL # CT029 / The MUV
For questions, concerns or replacement parts call Gigatent at our Toll Free Number:
877-836-8701 Monday-Friday 9am-5pm EST or email us at [email protected]
DESCRIPTION QTY.
CAR TENT
100% Polyester
1
POLES
Fiberglass Pole; Black
x
STAKES
Metal
4
CARRY POUCH
100% Polyester
1
ASSEMBLY INSTRUCTIONS
Contents and colors may vary.
Please retain package for
future reference.
STYLE #: CT029
WASHING & CARE INFORMATION
Hand wash using a mild dishwashing soap and soft
sponge, then allow the fabric to completely air dry. To
prevent mold or mildew do not store wet or damp.
WARNING:
Keep all flame and heat away from tent and tent fabric.
This tent meets flammability requirements of CPIA -84 .
THIS TENT IS NOT FIRE PROOF.
IF LEFT IN OPEN FLAME THE TENT WILL BURN.
CAUTION:
This product was not designed to be left out in the sunlight
for extended periods of time. Prolonged UV exposure will
rapidly break down the fabric of this product. UV damage
is not covered under our warranty
WARNING :
NEVER LEAVE CHILDREN UNATTENDED.
WINDY CONDITIONS MAY UPROOT THE
TENT. ALWAYS STAKE DOWN TENT.
ADULT SUPERVISION REQUIRED.
AGES 3 AND UP RECOMMENDED.
CAUTION:
Never use any fuel-burning or oxygen-consuming
devices, or any devices that produce fumes, including
stoves, lanterns, candles, hibachis or heaters in or
around your tent. This can result in carbon monoxide
poisoning, injury or death
Manufactured in China for
Gigatent
55 Haul Rd
Wayne, New Jersey 07470
www.gigatent.com
1-877-873-8601
TO VIEW FULL SELECTION OF OUR
PLAY TENT PRODUCT LINE,
GO TO WWW. GIGATENT.COM
The MUV
CT029
PA
T P
EN
DIN
G
14
5
o
P.H.
ENG
-KO
REA
1
2
3
4
567
8 9
9 9 10 11
12
PA
T P
EN
DIN
G
14
5
o
P.H.E
NG-
KOR
EA
1
2
3
4
567
8 9
9 9 10 11
12
STEP 1:
Confirm product contents by emptying contents of bag(s)
and confirming all parts are included and undamaged.
STEP 2:
Select a smooth level site and spread out your tent.
STEP 3:
There are 2 poles that are bent into a U shape 1 long one and 1
shorter one.
Thread the longer one (figure D) through the pole sleeve over the
rear wheels and insert the ends into the pole pockets (figure A)
located in front of the rear wheels.
Thread the shorter pole (figure C) through the pole sleeves located
over the front wheels and insert the ends into the pole pocket
(figure A) located behind the front wheels.
poles. Note:The clips at the front and rear of the tent should be
attached BELOWthe front and rear poles.
STEP 4:
There are 2 short straight poles with narrow ends. (figure E)
Take these poles and insert them through the pole sleeves above
the doors and insert the narrow tips through the brass grommets
below the pole clips sewn into the tent.
STEP 5:
Now take one of the longest poles that have multiple bends to it and
insert the poles into the pole pockes (figure A) at the end of one
long side. Note:The end that goes to the front has the shortest
section before the first bend in the pole.
Repeat this for the other pole.
STEP 6:
The last step is to attach all of the pole clips (figure E) to these
longer poles. Note:The clips at the front and rear of the tent should
be attached BELOW the front and rear poles.
