SETUP INSTRUCTIONS
(10x10, 10x15, 13x13,13x20,17x17)
Страница 1: ...SETUP INSTRUCTIONS 10x10 10x15 13x13 13x20 17x17 ...
Страница 2: ...aken such that any overhead powerlines are duly noted and avoided during the tent erection process THANK YOU FOR YOUR PURCHASE TentCraft Inc in no way represents the estimated holding power to be true in all cases It is an estimate and as such does not imply that the figures are sufficient to hold any tent securely in windy or adverse weather conditions The tent installer accepts sole responsibility...
Страница 3: ...k cap at this point Step 3 Each person will grab the center scissor piece on their side of the tent frame and pull it away from the center by walking pulling backwards Move the legs outwards until the scissor pieces are fully extended Step 4 To lock the roof into place stand near one of the legs with a foot holding down the baseplate at the end of the leg Grab and press up on the scissor piece at ...
Страница 4: ...pieces snapping it back into the buckle Step 6 Pull the strap on the buckle to tighten the valance strap until the valance is taut Repeat these two steps for the remaining three legs When taking the tent down be sure to unbuckle these valance straps Step 7 Lastly extend the legs to the desired height by pushing in the push button on the inside of the legs and pulling up until the legs snap into pl...
