Step 2- ATTACHING THE CANOPY and SCREEN INSERT
Step 3- EXTRA STABILITY
5) Drape the canopy over the frame and make sure it is lined up correctly.
6) Attach the corner extensions to the bottom of the leg pole by inserting the corner hook (Figure D) into one of the holes in the bottom
of the leg.
7) Attach the fabric hook and loop strap sewn to the inside of the canopy to the poles (Figure E). NOTE: This step is very important as it
will keep the canopy fabric taut to the frame, preventing rain water to accumulate on the canopy.
8) Stake out the bottom of the canopy by inserting the stake through the metal loop sewn to the bottom of the leg extensions. The canopy
can be used as is or you may add the Screen Insert.
NOTE: To add SCREEN INSERT continue with the Assembly Instructions.
9) Unfold the Screen Insert and attach the top center hook into the Center Hub (Figure F). Continue to attach Screen ceiling by attaching
pole clips to the frame (Figure G). Finally, attach the corner Screen hooks to into the Corner Hubs (Figure H).
10) Attach the pole clips to the leg poles (Figure I).
11) Insert the Pins found attached to the metal rings to the bottom of the 4 corners into the ends of the Leg Poles (Figure J).
12) Stake out the Screen insert using the metal rings and the stake loops (Figure K) following the stake placement description at the
bottom of the page.
13) It is HIGHLY RECOMMENDED that the canopy and/or screen house be secured to the ground with the included guy lines and stakes
(Figure L). Not doing so may cause the canopy to lift off the ground causing damage to the item and bodily harm.
NOTE: To ensure rain water does not collect on the canopy, attach guy ropes to the nylon loops located on the center of each panel.
Tent
40
Stake placement
Approx.
36”-48”
L
Corner
Extensions
INSIDE
INSIDE
D
E
F
H
J
G
I
K
