Gigaset SL610H pro, Руководство пользователя

Страница: 35 / 45

33
Service (Customer Care)
Gigaset SL610H PRO / GBR / A31008-M2352-R101-2-PG43 / appendix.fm / 24.08.2012
V
e
rsion 4,1, 21
.11.2007
Service (Customer Care)
Questions? For rapid assistance, refer to this
user guide or visit www.gigaset.com/pro.
The trade outlet will be happy to help with
further questions relating to your
Gigaset SL610H PRO.
Questions and answers
If you have any questions about the use of
your phone, you can contact us 24/7 at
www.gigaset.com/pro .
The table below contains a list of common
problems and possible solutions.
Registration or connection problems with a
Bluetooth headset.
¥
Reset the Bluetooth headset (see the user
guide for your headset).
¥
Delete registration data from the handset
when deregistering the device ( ¢
page 27).
¥
Repeat the registration process (
¢
page 26).
The display is blank.
1. The handset is not switched on.
¥
Press and hold the end call key
a
.
2. The battery is empty.
¥
Charge the battery or replace it (
¢
page 9).
Not all menu items are displayed.
The menu view is simplified.
¥
Activate complete menu view ( expert
mode
•
) (
¢
page 14).
"No Base"
flashes on the display.
1. The handset is outside the range of the base.
¥
Move the handset closer to the base.
2. The base's range is reduced because Eco
Mode is activated.
¥
Deactivate Eco Mode (
¢
page 23) or
reduce the distance between the handset
and the base.
3. The base is not switched on.
¥
Check the base power adapter.
"Please register handset" flashes on the dis-
play.
Handset has not been registered with the base or
has been deregistered.
¥
Register the handset (
¢
page 10).
Handset does not ring.
1. The ringtone is deactivated.
¥
Activate the ringtone (
¢
page 31).
2. Call divert set for "All Calls".
¥
Deactivate call divert.
3. The phone only rings if the phone number has
been transferred.
¥
Activate the ringtone for unknown calls
( ¢
page 31).
4. The phone does not ring in a specific time
period.
¥
Deactivate the Time Control or change the
time period ( ¢
page 30).
The other party cannot hear you.
You have pressed the mute button
h
. The
handset is "muted".
¥
Reactivate the microphone (
¢
page 17).
You hear an error tone when keying an input.
Action has failed/invalid input.
¥
Repeat the process.
Watch the display and refer to the user guide
if necessary.
Exclusion of liability
Some displays may contain pixels (pic-
ture elements), which remain activated
or deactivated. As a pixel is made up of
three sub-pixels (red, green, blue), it is
possible that pixel colours may vary.
This is completely normal and does not
indicate an error.