Appendix
Gigaset SL 3501, USA, A31008-L350-U122-2-7619
anha.fm
26.06.0
84
FCC / ACTA Information
Warning
: Changes or modifications to this unit not expressly approved by Siemens Cordless Products could
void the FCC authority to operate the equipment. This includes the addition of any external antenna device.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
bottom of the base station is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network nust comply with
the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is
also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs
on a telephone line may result in the devices not ringing in response to an incoming call. In most but no all areas,
the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to
a line, as determined by the total RENs, contact the local telephone company. For products approved after July
23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without a decimal point (
e.g.
, 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance, that
temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone
company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you belive it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could
affect the operation of the equipment. If this happens the telephone company will provide advance notice in
order for you to make necessary modifications to maintain uninterrupted service. If you experience trouble with
this telephone system, disconnect it from the network until the problem has been corrected or until you are sure
that the equipment is not malfunctioning.
If trouble is experienced with this equipment, for repair or warranty information, please contact Siemens
Customer Care, Tel. 1-888-777-0211. If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem is resolved. This equipment is of a
type that is not intented be repaired by the Customer (user).
This telephone system may not be used on coin service provided by the telephone company. Connection to
party line service is subject to state tariffs. Contact the state public utility commission, public service
commission or corporation commission for information. Privacy of communications may not be ensured when
using this phone.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of
this equipment does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
This telephone system equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. Some cordless telephones operate at frequencies that
may cause interference to nearby TV’s and VCR’s; to minimize or prevent such interference, the system base
should not be placed near or on top of a TV or VCR; and, if interference is experienced, moving the base farther
away from the TV or VCR will often reduce or eliminate the interference.
However, there is no guarantee that interference will not occur in a particular installation. If this telephone
system does cause harmful interference to radio or television reception, which can be determined by turning
the system off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
