7
Gigaset S850 / HSG IE-UK en / A31008-M2665-L101-1-7619 / starting_HSG.fm / 1/23/15
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Getting started
Attaching the belt clip
The handset has notches on each side for attaching the belt clip.
•
Attaching the belt clip:
Press the belt clip onto the back of the
handset so that the tabs on the belt clip click into place in the
notches.
•
Removing the belt clip:
Press the centre of the belt clip firmly
with your right thumb.
Push the nail of your left thumb up
between the clip and the casing.
Slide the clip upwards to
remove.
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤
Press middle of the control key
.
¤
Press the keys
and
slowly
and successively . . . the
language settings display appears, the set language
(e. g. English) is highlighted (
= selected).
¤
Select different language: Press the control key
until the
desired language is marked in the display, e. g. French press
the key on the right directly underneath the display to activate the language.
¤
To revert to idle status: Press and
hold
the End call key
Registering the handset
A handset can be registered to up to four base stations. The registration process depends on the
base station.
On the base station
¤
Press and
hold
the Registration/Paging key on the base station (approx. 3 sec.).
On the handset
¤
. . . use
to select
Settings
OK
Registration
OK
Register
Handset
OK
. . . use
to select base station (if the handset is already registered to
four base stations)
OK
. . . an available base station is sought . . . enter system-PIN
(default setting:
0000
)
OK
Once registration is complete, the handset returns to idle status. The internal number of the
handset appears in the display, e. g.
INT 1
. If not, repeat the procedure.
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and to
enable the alarm to be used.
Deutsch
English
Francais
Registration must be initiated on the base station
and
on the handset.
Both must be carried out
within 60 secs
.