Miscellaneous
18
Grep-eng.fm
26.10.2012
Gig Repeater, IM: A31008-M601-R101-9-SU19
Using the verification tone
The verification tone enables you to establish whether or not the handset is working in the extended area
of the Gigaset Repeater. This tone is audible on the activated handset as long as the unit is connected to
the Gigaset Repeater.
Carry out the procedure described below on your Gigaset Repeater in order to switch the verification tone
on and off:
u
$
Switch on the unit (power plug inserted)
u
$
Press the registration button for at least 20 seconds to switch on/off
Miscellaneous
Troubleshooting
Technical data
Problem
Cause
Action
Left LED flashes continuously
when the registration procedure
has been concluded
No radio connection to the
base station
Repeat registration
Left LED flashes continuously at a
selected location
No radio connection to the
base station
Select a new location
Left LED does not light up at all No power
Check the power point
No reception of the handset in
the area of the repeater
Repeater not registered
No radio connection to the
base station
Handset cannot find the
repeater
Repeat registration
Select a new location
Switch handset on and off
Standards:
Compatible to DECT, GAP
Radio frequency range:
1880 MHz - 1900 MHz
Transmit power:
10 mW average power per channel
Range:
max. 300 m outdoors,
max. 50 m indoors
Power supply:
230 V, 50 Hz (plug-in power unit)
Power consumption:
Standby: 0.7 W
During call: 0.9 W
Operating temperature:
0 °C to + 45°C
Dimensions (mm):
131 x 111 x 50 (LxBxH)
Weight:
154 g
Power cable length:
approx. 1.8 m
