LED behaviour:
Flashing alternately green and red = camera is booting up
Green light = camera is connected to the server
Green flashing = camera is recording
Red flashing = software update ongoing
Red light = camera reset to factory mode
Factory reset:
If you want to factory reset your camera you start with deleting it in your Gigaset elements
app. Locate the connection box for the Camera required to be factory reset.
Press and hold the reset button on the connection box for 5 seconds. After 5 seconds the
Red LED will flash multiple times to indicate the reset process has been initiated. Once the
Red LED has gone back to solid state, please proceed to power cycle your product.
Your product has now been reset back to factory default. Please follow the Camera set up
process to install your Outdoor Camera.
LED behavior and Factory Reset
DE
–
EN
