Gigaset Gigaset SX100 isdn Скачать руководство пользователя страница 17

Страница: 17 / 185

Preparing to use your phone

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / starting.fm / 26.08.2003

Ring delay

When ring delay is active, the signal for an incoming call is delayed on the handset (e. g.

after 5 rings – the number can be set). Ring delay can be set individually for each

handset and for each incoming MSN (page 118).
As an example, an incoming call should be signalled to MSN1 Int.11 when Int.12 does

not answer the call. To do this, activate the ring delay for Int.11 and MSN1 (e.g., to

5 rings). The call is signalled directly to Int.12 , but Int.11 is signalled after the 5th ring.

Launching the Getting started wizard and setting the basic

Launching the Getting started wizard:

Setting the date and time:

Depending on the network provider, the date and time are adopted automatically from

the telephone network during the first outgoing call.
The display shows:

Enter time?

If the time should be displayed in 12-hour mode, you can modify the setting later

(page 104).

Open the menu.

Base Settings

Select the menu item and confirm.

Installation

Select the menu item and confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to launch the Getting started

wizard.
If you already have set a system PIN (not 0000)

(page 113), you will be asked to enter it.

If required, enter the system PIN and confirm.

◆

The Getting started wizard cannot be used simultaneously by multiple

handsets.

◆

If there is already settings data (factory default or previous settings),

this data is shown at the appropriate positions in the display and can

be modified there.

◆

To cancel the Getting started wizard, press the end call key and hold.

All changes you have already saved using

Save entry

§§OK§§

are

retained. The handset returns to idle status.

◆

To skip a setting, press the display key

§§NO§§

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to set the date and time.

Enter the date (6-digit) and time (4-digit in 24-hour

mode) in series, e.g. 200903 0945 for 9/29/03

9:45 a.m.

Press the display key to open the submenu.

Save entry

Select the menu item and confirm.

Содержание Gigaset SX100 isdn


























































































































































































Результаты поиска

Содержание Gigaset SX100 isdn

Отзывы:

Похожие инструкции для Gigaset SX100 isdn

Бренды по названию

Популярные бренды

Gigaset Gigaset SX100 isdn, Инструкция по эксплуатации

Результаты поиска

Содержание Gigaset SX100 isdn

Отзывы:

Похожие инструкции для Gigaset SX100 isdn

Бренды по названию

Популярные бренды