AL410H (Puma glossy) / IM4 eng / A31008-M2267-R151-1-4N19 / starting.fm / 20.09.2012
5
Registering handsets
Before you can use the phone, you must first register the handset to the base.
Each additional
handset must be registered with the base for it to work properly! The registration procedure
will depend on the type of base.
Automatically registering the AL410H handset to the Gigaset AL410/AL410A
base
Prerequisite:
The handset must not already be registered to a base.
Manually registering the AL410H handset
You must manually register the handset on both the handset (1) and the base (2).
Once registration is complete, the handset returns to idle status. If not, repeat the procedure.
Please note
u
Each key press interrupts automatic registration.
u
If the handset is already registered to at least one base or if automatic registration does
not work, the handset will have to be registered manually.
1) On the handset
Menu
¤
Settings
¤
OK
¤
Handset
¤
OK
¤
Register HS
¤
OK
¤
Enter the base system PIN (default setting: 0000)
¤
OK
Registering
will appear on the display.
2) On the base
Within
60 seconds
of entering the system PIN, press and
hold
the registration/paging key
(min. 3 seconds).
Please note
For instructions on deregistering the handsets, please consult the base user guide.
¤
Place the handset with
the
display facing up
in
the base.
The handset registers automatically. Registration
can take
up to 5 minutes
.
Do not remove the handset from the base
during this time.
After it has registered, the handset display shows
HS registered
briefly and then returns to idle sta-
tus.
¥
V
Put into base
Þ
Menu
Registering
