gigaset 5005 / SAR arab-eng-frz / A30054-M6522-H301-4-3T19 / 5005.fm /
24.11.2009
4
GB
destination, to your repertory
or speed dial keys just like a
normal number.
Recall key
In public telephone systems,
the recall key is required to use
certain additional services;
e.g. for "Call back on busy".
By default, your telephone is
set to tone dialling with a flash
time of 100 ms (Tone 1). You
may need to adjust the flash
time using the slide switch on
the underside of the
telephone.
Appendix
Care
To clean, wipe with a moist or
antistatic cloth only, never
with a dry cloth (risk of elec-
trostatic charging and
discharge) or strong cleaning
agent.
If your telephone is not
working perfectly
Lift handset, no dialling
tone
: Is the connecting lead
correctly plugged into the tel-
ephone and the telephone
socket?
Dialling tone audible but tel-
ephone will not dial
: The
connection is OK. Is the dial-
ling mode set correctly?
The other party cannot hear
you
: Mute activated?
Regular pulse noises can be
heard during a call
: The
connection is receiving meter-
ing pulses from the exchange,
which the telephone cannot
interpret. Contact your
network operator.
Insert strips
Blank insert strips for the rep-
ertory keys can be found on
the Internet at
Contacts
If you should encounter any
problems when operating the
telephone connected to a
communication system with
analogue network access,
please contact the network
operator responsible or your
dealer.
Authorisation
This device is intended for
connection to analogue net-
works outside the EEA (with
the exception of Switzerland)
depending on national type
approval.
Country-specific requirements
have been taken into consid-
eration.
We, Gigaset Communications
GmbH, declare that this device
meets the essential require-
ments and other relevant reg-
ulations laid down in Directive
1999/5/CE.
A copy of the 1999/5/EC Dec-
laration of Conformity is avail-
able at this Internet address:
