Gigaset E560A / LUG US en / A31008-M2728-R301-1-7619 / operating.fm / 1/21/19
Te
mplat
e
M
odu
le
, V
e
rs
io
n 1.
2,
11
.0
9.
201
8
Getting to know your telephone
13
en
fr es
Volume keys
During a call, set the volume for the
receiver/headset
or
speaker
or in the case of an incoming
call, set the volume of the
ringtone
(5 levels).
¤
Press the volume keys on the right side of the handset:
(louder) /
(quieter)
The current setting is permanently saved after approx.
two seconds (
Extra-loud function
¤
Press the top volume key
until you reach the highest
level.
The extra-loud setting only applies for the duration of the call.
Direct dialling keys A to D
You can store particularly important numbers called frequently under the four
Direct dial keys
.
You can assign an
external number
or an
internal call
to every direct dial key.
To dial these saved numbers, press the relevant direct dialling key
to
on the handset or
on the base.
You can also assign the emergency function to
direct dialling key
(
Assigning a function to direct dialling keys
Prerequisite:
The direct dialling key in question has not already been assigned a function.
¤
In idle status, press the direct dialling key (
to
) on the handset to which you wish to
assign a function.
Select the relevant function using
:
The labelling of the direct dialling keys applies to the handset and the base.
Volume:
Back
OK
•
This setting can result in harm to health in persons with a normal hearing ability
and is only intended for persons with a hearing impairment or reduced hearing.
•
Disruptive noises on the phone line can be increased.
¤
Label with Ext. No.
Enter an external phone number directly.
¤
Enter the number and press
OK
.
¤
Enter the name and press
OK
.
¤
Label with Internal Call
Direct dial to a handset registered to the same base.
If more than one other handset is registered:
Select handset
OK
¤
Label with Call All Int.
Direct dial to all handsets registered to the same base.
¤
Label with Dir. Number
Label the key with a number from the directory. The directory is
opened.
Select a number and press
OK
.