75
Setting up the answering machine
Gigaset S44 / englisch / A31008-M368-B103-1-7619 / answeringm_config.fm / 21.2.05
Deactivating/activating spoken date and time
You can have the recording date and time (time stamp) announced when each mes-
sage/memo is played back (activated by default).
Requirement:
You have selected an answering machine (page 122).
Setting the recording time and recording quality
You can set the maximum length of a message and its recording quality. The recording
quality determines the total recording time of your answering machine.
With the
High quality
setting the total recording time is up to 12 min., with
Long
recording
(standard quality is generally adequate) up to 25 min. By default, the record-
ing quality is set to
Long recording
and the recording time to
Maximum
.
Setting the recording time
You can limit the maximum length of a message to
1 minute
,
2 minutes
or
3 minutes
.
If you set the recording time to
Maximum
, it is "unlimited" (until the memory is full).
Requirement:
You have selected an answering machine (page 122).
s
Settings
Select and confirm.
Message/Memo
Confirm.
s
Time stamp
Select and confirm (
‰
= activated).
OK
OK
OK
i
The recording of a call ends:
◆
after a pause in speaking lasting more than 8 seconds;
◆
at the end of a call; the caller terminates the connection;
◆
after the maximum set recording time has elapsed or, if the setting
Maximum
was used, when the memory is full.
s
Settings
Select and confirm.
Message/Memo
Confirm.
Message length
Confirm.
s
Maximum
Select the recording time and confirm,
e. g.
Maximum
(
‰
= activated).
OK
OK
OK
OK
i
When the recording duration has elapsed, the concluding announcement
is played automatically, if recorded. The connection is then terminated.
The recording time does not apply to memos.