Gigaset CX203 isdn Скачать руководство пользователя страница 50

Страница: 50 / 168

SMS (text messages)

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / sms.fm / 08.10.2003

SMS (text messages)

You can use your base station to send and receive SMS text messages (

hort

essage

ervice). You ca send an SMS to any fixed network or mobile phone network number.

Your SMS can be received as a text message by any device with SMS functionality

(mobile phone, PC, another telephone). If the recipient of your SMS does not have a

phone with SMS functionality, then the SMS is played back.

General

Text messages are exchanged between SMS centres that are operated by service

providers. The telephone number of the SMS centres through which you wish to send

and receive text messages must be entered in your phone (page 48). Up to ten SMS

centres can be entered. By default, the

SMS Service Centre "Anny Way"

and

the

provider's SMS service

are preconfigured. You can change the telephone numbers of

the SMS centres.
You ca receive text messages via

any

of the SMS centres whose number you have

entered. Of course you must be registered to receive text messages with those SMS

centres (page 50).
Your text message is sent through the SMS centre that is entered as the

active

send

service centre.

Before you can send and receive text messages

◆

Calling Line Identification may not be permanently deactivated for the MSN used

(page 22).

◆

To receive text messages you must be registered with your service provider

(page 50).

◆

You must not allow the network provider to bar the phone numbers you have

entered for SMS centres.

In Germany, the SMS service is available exclusively to telephone numbers that are

connected with the

local area network

via

your network provider

(you receive your

telephone bill from your network provider). It is currently not possible to send a text

message if you have a call-by-call connection.
If the telephone of a receiver cannot receive an SMS in the fixed network, the SMS is

automatically read as a voice message. Between 7.00 and 22.00 hrs, these text

messages are delivered immediately in the form of a telephone call. Text messages sent

after 22.00 hrs are stored and delivered the next day.
If you have concluded a preselection contract with a network provider, ask whether they

support the "Fixed line SMS" feature. (Preselection means you are bound contractually

to a network provider.)
In Switzerland the SMS function is not supported within the ISDN network.

Содержание CX203 isdn









































































































































































Результаты поиска

Содержание CX203 isdn

Отзывы:

Похожие инструкции для CX203 isdn

Бренды по названию

Популярные бренды

Gigaset CX203 isdn, Руководство пользователя

Результаты поиска

Содержание CX203 isdn

Отзывы:

Похожие инструкции для CX203 isdn

Бренды по названию

Популярные бренды