Gigaset C610/610AIP / MEA EN / A31008-M2312-A601-1-UZ43 / install_3pg.fm / 3/8/11
V
e
rsion 5, 23.0
9
.2008
5
Preparing the handset
Inserting the supplied batteries and closing the battery cover
Connecting the charger and charging the batteries
>
Check the polarity when inserting the batteries
(see symbols in or on the battery compartment).
>
Use only the rechargeable batteries recom-
mended.
Once the batteries have been inserted, the handset
switches on automatically.
>
First insert the tab on the top of the
battery cover in the recess on the
housing .
>
Then press the cover until it clicks
into place
.
>
The display is protected by a plastic film. Please remove the protective film!
>
Place the handset in
the charger and wait
until the batteries
are fully charged
(approx. 10 hours).
>
Do not put the handset back in the
charger until the batteries are fully
discharged through use.
>
After the first battery charge
and
discharge, you may place your handset
in the charger after every call.
>
The battery charging status is displayed
in the idle display:
=
e
V
U
(empty to full).
1
A
B
B
A
2
>
Observe the sequence (A, B)!
B
A
10 h
