
53
Base station settings
Gigaset C300-C300A/CS310-CS310A / GBR / A31008-M2223-L101-4-7619 / registr_sett.fm / 13.09.2012
V
e
rsion 4, 16.0
9
.2005
Activating repeater support
With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Prerequisite:
A repeater is registered.
§Menu§
¤
Settings
¤
System
¤
Repeater Mode
Press
§OK§
to activate/deactivate repeater
mode (
³
= activated).
After activating or deactivating the
repeater, switch your handset off and
on again (
Protecting against
unauthorised access
Protect the system settings of the base
station with a PIN known only to yourself.
The system PIN must be entered when,
for example, registering/de-registering a
handset to/from the base or when restoring
the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting:
0000
) to a 4-digit
PIN known only by you.
Gigaset C300A/CS310A: Setting a system PIN
enables remote operation of the answering
machine (
§Menu§
¤
Settings
¤
System
¤
System PIN
~
Enter the current system PIN
and press
§OK§
.
~
Enter your new system PIN and
press
§OK§
.
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code
0000
:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to
0000
.
Resetting the base to the
default settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered
u
Eco Mode
is activated and
Eco Mode+
is
deactivated
u
The system PIN is not reset
§Menu§
¤
Settings
¤
System
¤
Base Reset
§Yes§
Press the display key.
Please note
u
Eco Mode
/ Eco Mode+
and repeater support cancel each
other out, i.e., you cannot use Eco
Mode and
Eco Mode+
when using a
repeater.
u
The default encrypted transmission
setting is deactivated when a
repeater is activated.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the default settings.
Please note
The answering machine is ready for use
approx. 15 seconds after
the base has
been connected or reset.
Содержание C300
