Gigaset A59H, Руководство пользователя

Страница: 14 / 20

Gigaset A59H / Andina / A31008-M2071-U501-4-6043 / main.fm / 19.10.2011
14
V
e
rs
ion 13
0.
06.
20
09
Registering the handset
Before you can use your handset, it must be
registered to the base station. You must ini-
tiate handset registration on the handset
and on the base station.
Note: If the handset has been delivered
with a base station it is registered
On the base
¤
Activate the registration function.
On the handset
f
(open menu)
¢
ADVANCED SET
¢
|
¢
REGISTRATION
¢
|
~
(enter current PIN, default: 0000)
¢
|
The handset is assigned the lowest unas-
signed internal number (1–4).
Once the handset has been registered suc-
cessfully, it returns to idle mode. The name
(default: Gigaset) and the handset’s internal
number is shown in the display, e.g.
Gigaset 1
.
If the handset was not registered success-
fully, the display will show
PLS REG H/S . In
this case repeat the procedure.
Deregistering the handset
Precondition: the handset is in idle mode.
f
(open menu)
¢
ADVANCED SET
¢
|
¢
UNREGISTER
¢
|
~
(enter current PIN)
¢
|
¢
p
(select handset to be deregistered) ¢
|
A long confirmation tone indicates the suc-
cessful deregistration. The handset display
will show
PLS REG H/S .
Making internal calls
Internal calls are free calls to other handsets
that are registered to the same base station
or to the base station itself.
Calling another internal participant
k
¢
~
(enter internal number of parti-
cipant)
0 = base station, 1-4 = handset number,
* = all
If only 1 handset is registered you need not
enter a number to call the handset from the
base.
Accepting internal call
¤
To answer the call press
c
.
¤
To end the call, press
a
.
Incoming call during internal call
An incoming call is indicated by an acoustic
signal.
c
(answer external call, end internal call)
or
k
(hold internal call, accept external call)
¢
k
(start conference)
Internal consultation calls
When you are speaking to an external par-
ticipant, you can call an internal participant
at the same time for consultation.
Press and hold
k
(put external call on
hold)
k
¢
~
(enter internal number of parti-
cipant)
You are connected with the
internal parti-
cipant.
k
(toggle between internal and external
participant)
Transferring a call to another handset
You can transfer an external call to another
handset.
k
(put external call on hold)
k
¢
~
(enter internal number of parti-
cipant)
You are connected with the
internal parti-
cipant.
Please note
◆
The default system PIN may have
been changed, ( ¢
page 16).
◆
The handset name can be changed,
( ¢
page 15).
Please note
Do not deregister handsets unless necessary!