Gigaset A59H / Andina / A31008-M2071-U501-4-6043 / main.fm / 19.10.2011
16
V
e
rs
ion 13
0.
06.
20
09
Setting the key beep
Your telephone will beep whenever a key
on the handset is pressed. You can deacti-
vate this acoustical signal (default:
ON
).
f
¢
PERSONAL SET
¢
|
¢
HANDSET TONE
¢
|
¢
KEY BEEP
¢
|
¢
p
(select
ON
or
OFF
)
¢
|
Activating/deactivating auto
answer
If you activate this function, when you
receive a call you can simply lift the handset
out of the charging cradle without having
to press the talk key
c
.
f
¢
PERSONAL SET
¢
|
¢
AUTO ANSWER
¢
|
¢
p
(select
ON
or
OFF
)
¢
|
Setting date and time
f
¢
CLOCK/ALARM
¢
|
¢
DATE & TIME
¢
|
¢
~
(enter date: DD/MM)
¢
|
¢
~
(enter time: HH:MM, 24hrs format)
¢
|
¤
Use
{
as backspace.
Setting the alarm clock
You can set an alarm clock on the handset.
Precondition
: The date and time have
already been set, see above.
An alarm will sound for 1 minute at the set
time once or daily.
f
¢
CLOCK/ALARM
¢
|
¢
ALARM
¢
|
¢
p
(select
ON ONCE
or
ON DAILY
or
OFF
)
¢
|
If you select
ON ONCE
or
ON DAILY
~
(enter time: HH:MM, 24hr format)
¢
|
¤
Use
{
as backspace.
If the alarm is activated, the
¼
icon appears
in the display. During the alarm
--ALARM--
is
flashing on the display.
¤
To cut off the alarm press any key on the
keypad.
Setting the alarm melody
You can choose from 3 alarm melodies
(default:
MELODY 1
).
f
¢
CLOCK/ALARM
¢
|
¢
ALARM TONE
¢
|
¢
p
(select melody)
The selected melody is played.
¤
To confirm a selected melody
¢
|
Changing the PIN
The base station is protected via PIN against
unauthorised handset registration. You can
change the preset PIN via menu.
f
¢
ADVANCED SET
¢
|
¢
CHANGE PIN
¢
|
¢
~
(enter current PIN, default: 0000)
¢
|
¢
~
(enter new PIN: 0 to 9 digits)
¢
|
¤
Use
{
as backspace.
Restoring to the factory
settings
You can reset any individual settings and
changes that you have made. Phone book
and calls list entries are not affected. After
restoring the base, handsets are not
affected.
Precondition:
handset and base are in idle
mode.
Please note
Once the date and time are set, if there
is a power cut of the mains, you should
reset date and time.
Please note
¤
If you have forgotten the PIN reset
the base unit to the factory settings
to reset the PIN to default setting
0000,
