33
First steps
Gigaset A510IP / USA en / A31008-M2230-R301-2-6019 / starting.fm / 09.10.2012
V
e
rsion 4, 16.0
9
.2005
The connection selected here is used as the standard send connection on this
handset if you briefly press the talk key
c
after entering the number.
You always have the option of selecting another connection to set up a call. If you
press and
c
, a list with all available connections is displayed for
selection
Instead of a specific standard send connection, you can also assign
Select at each
call
to the handset. Each time you make a call, you then have to select the connec-
tion you wish to use on this handset
If other handsets are already registered to the base, you are requested to assign
send and receive connections for the handsets. The following is shown in the dis-
play:
¤
Perform steps
for each registered handset.
After successfully configuring the settings, you will briefly see the following display:
Completing the installation
If you have started the wizard using the message key
f
, the handset switches to
idle status (an example for the display in idle status):
f.
If the handset is to make calls via a differ-
ent connection/phone number:
¤
Press
right
on the control key
v
repeatedly, until the required connec-
tion is displayed (in the example,
IP1
).
¤
Press the display key
§OK§
to save the
settings.
INT 1
send calls via:
f
IP1
g
Back
OK
μ
Connec. assign.
completed
