7
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
Te
mpla
te Bali, V
e
rsion
1, 16.0
2.2012
Submenus
The functions in the submenu are indicated by name.
Selecting a function:
¤
You can scroll between functions using the control key
q
. The function is shown in the display.
¤
Press the display key
§OK§
to select the displayed function. This opens the corresponding submenu and the first entry
is displayed.
If you press the display key
”
or
briefly
the end call key
a
, the display returns to the previous menu level or you cancel
the operation.
Any settings you have not confirmed by pressing the display key
§OK§
are lost.
Reverting to idle status
From any point in the menu:
¤
Press and
hold
the end call key
a
or
¤
Do not press any key: after 2 minutes, the display will
automatically
revert to idle status.
Making calls
Making external calls and ending calls
External calls are calls using the public telephone network.
~
(Enter the phone number)
¤
c
.
The phone number is dialled. (Or you can
first
press and
hold
talk key
c
[dial tone] and then enter the number.) During
the call you can adjust the earpiece volume using
t
and set the volume with
q
.
End the call/cancel dialling:
Press the end call key
a
.
You can automatically insert a network provider dialling code before any phone number (
Accepting a call
The handset indicates an incoming call by ringing and by a display on the screen.
Press the talk key
c
to accept the call.
When
Auto Answer
is activated (see menu overview
page 24), simply remove the handset from the base station/
charging cradle.
Calling Line Identification
When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is
stored in the directory.
Prerequisites:
1
You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen.
2
The caller has asked the network provider for his number to be identified (CLI).
External Call
appears in the display if you have not requested CLIP,
Withheld
appears if the caller has withheld CLI, and
Unavailable
appears if CLI has not been requested.
Handsfree operation
In handsfree mode, you activate the loudspeaker so that you can hear the caller without having to hold the handset to
your ear. During a call and when listening to the answering machine (Gigaset A410A only) you can activate or deactivate
handsfree mode by pressing the handsfree key
d
.
During the call in handsfree mode you can adjust the handsfree volume by pressing
t
and set the volume with
q
.
Muting
You can deactivate your handset's microphone during a call. Press the right control key
v
to mute the handset. Press
the control key
v
again to reactivate the microphone.
Automatic network provider preselection
You can store a call-by-call number (preselection number), which is
automatically
placed in front of numbers when you
dial them. If, for example, you wish to make international calls via special network providers, you can save the relevant
dialling code here.
In the "
With Preselect
" list, specify the dialling codes or the first digits of the dialling codes that you wish to assign to the
preselection number.