2
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
Te
mpla
te Bali, V
e
rsion
1, 16.0
2.2012
ECO DECT
During a call, the transmission power is automatically adjusted to the distance between handset and base station,
the smaller the distance, the lower the transmission power (radiation). In idle status the transmission power of the
handset is switched off. Only the base station ensures contact with the handset using low radio signals.
Your phone offers you the opportunity to further reduce the transmission power:
1) Reducing transmission power (eco mode)
If the setting
Max. Range
is switched to off (menu tree
page 24), the transmission power in standby mode and
during a call is reduced up to 80% at half range.
2) Deactivating transmission power (eco mode+)
With the setting
No Radiation
page 24), you turn off the transmission power of the base station in
standby mode completely. Please note:
◆
All registered handsets must support this feature.
◆
For quick connection of incoming calls the handset repeatedly switches to reception mode for short periods.
This increases energy consumption and therefore reduces the standby and talk times.
The base station at a glance
Basis A410A
Basis A410
5
3
2
1
4
6
1
1
Registration/Paging key:
Search for handsets (press
briefly
, paging
Register handsets (press and
hold
page 12).
2
Volume keys:
(
–
= quieter;
+
= louder)
During message playback: adjust the speaking volume.
While the phone is ringing: adjust the ringer melody volume.
3
Play/Stop key:
Switch answering machine on and off (press and
hold
);
play back new messages from answering machine (press
briefly
);
during message playback: cancel playback (press
briefly
).
Lights up:
answering machine is activated.
Flashes:
at least one new message is present or message is played
back or being recorded.
Flashes very quickly:
memory is full.
During message playback:
4 Skip to the start of the current message (press once) or go to the pre-
vious message (press twice).
5 Go to the next message.
6 Delete current message.