Gigaset 5040 / en / A30350-M211-R201-5-5W19 / bigButton_en.fm / 01.03.2011
11
en
Appendix
Care
To clean, wipe with a moist or antistatic cloth only, never
with a dry cloth (risk of electrostatic charging and
discharge) or harsh cleaning agent.
If your telephone is not working properly
No signal tone:
The tone volume might be set to 0.
Lift handset, no dialling tone:
Is the connecting lead
correctly plugged into the telephone and the telephone
socket?
Dialling tone audible but telephone will not dial:
The connection is OK. Is the dialling mode set correctly
(see page 8)?
PABX only: No connection or incorrect connection
when dialling from memory (e.g. redial, speed dial):
Program external line prefix.
The other party cannot hear you:
Have you pressed
the Mute key? Press the
J
key again. Is the plug
from the handset cord inserted correctly?
Recall key does not work:
Set appropriate flash time.
The caller's phone number and the calls list are not
displayed
:
Is the adapter connected (see page 3)?
Can Calling Line Identification be used (see page 9)?
Contacts
If you should encounter any problems when operating
the telephone connected to a communication system
with analogue network access, please contact the net-
work operator responsible or your dealer.
Authorisation
This device is intended for analogue phone lines in your
network.
Country-specific requirements have been taken into
consideration.
We, Gigaset Communications GmbH, declare that this
device meets the essential requirements and other rele-
vant regulations laid down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is
available at this Internet address:
www.gigaset.com/docs
