5005 / IM2 / A30054-M6522-A801-6-UR19 / 5005.fm / 27.02.2011
1
EN
Wall mounting
(see figure)
Once the connecting leads
have been connected, you can
mount the telephone on the
wall:
◆
Drill two dowel holes
(5 mm
∅
) 110mm apart,
insert dowels and screw in
countersunk head wood
screws with a slight gap to
the wall.
◆
On underside of tele-
phone: Lift out handset
bracket with screwdriver.
◆
Clip handset bracket into
handset shell mounting.
◆
Hang telephone on pro-
jecting screw heads.
Safety precautions
When installing, connecting
and operating the telephone,
always observe the following
precautions:
◆
Only use the jacks and
leads supplied.
◆
Only connect the connect-
ing lead to the intended
socket.
◆
Only connect approved
accessories.
◆
Lay the connecting lead
where it will not cause
accidents.
◆
Position the telephone on
a non-slip surface.
◆
For your safety and protec-
tion, the telephone may
not be used in the bath or
shower rooms (wet loca-
tions). The telephone is
not splash proof.
◆
Never expose the tele-
phone to sources of heat,
direct sunlight or other
electrical devices.
◆
Protect your telephone
from moisture, dust, cor-
rosive liquids and vapours.
◆
Never open up the tele-
phone yourself.
◆
Do not touch the plug con-
tact with pointed or metal-
lic objects.
◆
Do not carry the telephone
by the leads.
◆
If you give your telephone
to someone else, make
sure you also give them
the operating manual.
All electrical and elec-
tronic products should
be disposed of sepa-
rately from the munici-
pal waste stream via designated
collection facilities appointed by
the government or the local
authorities.
This crossed-out wheeled bin
symbol on the product means
the product is covered by the
European Directive 2002/96/EC.
The correct disposal and sepa-
rate collection of your old appli-
ance will help prevent potential
negative consequences for the
environment and human health.
It is a precondition for reuse and
