Gigamon GigaVUE-HC3, Руководство по установке оборудования

Страница: 111 / 142

Basic GigaVUE H Series Connections and Configuration 111
Saving Changes
It is a good idea to use the write memory command to save changes as you make
them. Later on, when you start setting up packet distribution with connections and
maps, your changes will added to the active configuration right away but will not be
saved across a node reboot unless you use the
write memory command to save your
changes to flash.
N
OTE
:
The name of the factory-provided configuration file is initial . You can see the
name of the most recently booted configuration file by using the show
running-configuration command (or show configuration ) and look for the ##
Running database entry. In Figure 4-28 , you can tell that the GigaVUE H Series node
is currently operating with the initial configuration file.
Refer to the GigaVUE-OS CLI Reference Guide for information on using configuration
files.
Figure 4-28: Showing the Current Configuration File