NETWORKING EQUIPMENT
GGM GS200
QUICK INSTALLATION
GUIDE
www.gigamedia.net
SMART SWITCH GS200 SERIES
PACKAGING CONTENT
This guide gives step-by-step instructions for setting up all GIGAMEDIA Smart Switch GS200 series. Open the shipping
carton and carefully unpack its contents. Please consult the packing list from the User Guide to make sure all items are
present and undamaged. Should it miss any item, please contact the GIGAMEDIA support team.
MANAGEMENT OPTIONS
The GIGAMEDIA GS200 series Smart Switch can be managed by using Telnet. You can also choose the Web-based
Management GUI, available through a Web browser. Should you want to use a SNMP-Based management tool, please
be advised that the SNMP feature is disabled by default.
Each switch must be assigne dits own IP address. Furthermore, the PC should have an IP address in the same range as
the Smart Switch.
WEB-BASED MANAGEMENT GUI
1. Connect your Ethernet cable to any of the Gigamedia GS200 Smart Switch front panel ports.
2. To login and configure your product, the PC must have an IP address in the same range as the Smart Switch. The
default GIGAMEDIA GS200 Smart Switch IP address is 192.168.2.1, so your PC should have an IP address like
192.168.2.x (« x » is a number between 2 and 254) and a subnet mask of 255.255.255.0.
3. Open your web browser and http://192.168.2.1 (factory-default IP address) in the address box.
4. Once the logon box appears, enter the default username and password:
a. Default username = admin
b. Default password = system
(please change your password after your first connexion)
• 1 x GIGAMEDIA Smart Switch GGM GS200
• 1 x Quick Installation Guide
• 1 x Power cord
• Rackmounted kit
BEFORE ANY CONFIGURATION OF YOUR SMART SWITCH GGM GS200
Please observe the following precautions before the Smart Switch installation:
• Install your Smart Switch in a cool and dry place. Please refer to the Technical Specifications for the acceptable
operation temperature and humidity ranges.
• Install the Smart Switch in a site free from vibration, dust and direct sunlight.
• Leave enough space on the left and right side of the Smart Switch for ventilation.
• Ensure that the power cable is firmly inserted into a suitable power outlet.
FEATURES (DEPENDING ON MODEL)
• From 8 to 48 Gigabit Ethernet auto-sensing RJ45
ports, auto MDI/MDIX, PoE or non-PoE
• Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x,
IEEE 802.3ab, IEEE 802.3z standards
• Support 10/100/1000Mbps auto-negotiation for full
duplex and half duplex
• Support desktop and 19’’ rack mounted installation
TECHNICAL SPECIFICATIONS
• Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE
802.3ab, IEEE 802.2z, IEEE802.3az
• Performance: Store and Forward mode, non-bocking
• L2/L2+ features: LACP, QoS, VLAN, port-mirroring,
IGMP, STP/RSTP/MSTP, ERPS (G.8032), ACL, Dual
image, etc.
• Operating temperature: 0 °C ~ 60 °C
• Storage temperature: -20 °C ~ 70 °C
• Working humidity: 10 % ~ 90 %, non-condensing
• Storage humidity: 5% ~ 90 %, non-condensing
INDICATOR INSTRUCTION
INDICATOR
STATUT
DESCRIPTION
SYS
Green LED ON
Working normally
Green LED blinking
Working normally
Green LED OFF
Abnormal working or Power off
PoE
(For PoE
compatible
model only)
Yellow LED ON
PoE device connected, working normally
Yellow LED blinking
Short circuit or current overload
Yellow LED OFF
No PoE device connected or Power off
LINK
Green LED ON
Data under transmission
Green LED blinking
Connection OK and data sent / received
Green LED OFF
No device connected
SFP UPLINK
Green LED ON
Data under transmission
Green LED blinking
Connection OK and data sent / received
Green LED OFF
No SFP module connected
TECHNICAL SUPPORT (OUTSIDE FRANCE)
• Technical self-service portal GIGAMEDIA: http://support.gigamedia.net
Directive WEEE
This product is covered by the WEEE II Directive (Directive 2012/19 / EU). It should not be thrown in the trash or dumped. Substances in the product may be
hazardous to human health or the environment. Disposal may be done by returning the product to your dealer or leaving it a collection point provided for
this purpose.
This product bears the CE mark which certifies its conformity with the directives LVD 2014/35/EU ; EMC 2014/30/EU and RoHS 2011/65/EU. Compliance has
been assessed in accordance with applicable standards in effect.
