GIGAMEDIA GGM PAKITDEMO, Руководство пользователя

Страница: 9 / 13

COM 4-16
Ω
100V
OUTPUT AUX2 AUX1
FM ANT
O P E R AT I O N I L L U S T R AT I O N
9
5.4 AUX1/AUX2 input
Figure 5.4
When back panel AUX1/AUX2 assist in, its volume should be control by AUX1/AUX2 knob, and combine
with BASS/TREBLE adjustment to reach effect you want. AUX1/AUX2 assist input should adopt RCA
unbalance connect port input, can used to connect with CD/MP3/TUNER.
5.5 4~16
Ω
/100V speaker output
Figure 5.5
The loudspeaker output with constant resistance and constant voltage in two ways, convenient to choose.
100V and 4~16
Ω
output can only have one and COM at the same time use the connection at the same time
corresponding constant pressure or constant resistance horn. With line between the transformer and the
speaker of the total power should be less than the rated power output power amplifier.
Note:
1. When using assistant input, should adjust volume in middle level to prevent noise.
2. Don't let audio source to many device, or will cause noise.
Note:
1. When use the device, pay attention to the positive and negative connection, avoid burning the
speaker.
2. Connection terminals fender is completed, please be sure to set up. Speaker terminals with high
voltage, do not touch, to avoid electric shock.
Volume control
CD
ON
OFF
POWER
OPEN/
CLOSE CD/
USB
/SD PLAY STOP NEXT PREVIOUS
USB
4~16
Ω
speaker 100V speaker
COM 4-16 Ω 100V
OUTPUT AUX2 AUX1
FM ANT