GIGAMEDIA GGM IPAMIC, Руководство пользователя

Страница: 8 / 13

- 8 -
If it is necessary to amend the IP address of the terminal according to the requirement of system
configuration, then you can amend the “IP address” in the dialogue window or press “next” button
(on the basis of existing IP a1 ascending order ) As shown blow figure 3, after setting the
corresponding parameters, click “edit” to edit, press “PING” button, check if the new IP address
terminal connect with the server, the pop-up window (As shown blow figure 3), shows that the
terminal which modify the new IP address has connected with server, then you can close the
window: “configure IP address”.

Introduction for Screen and Buttons
The standby screen show as below after start-up: